Of second, third, &c. Fluxions The Inverse Method, or The Finding of Fluents Of Rectifications, or, to find the lengths of Curve Lines To find the Surfaces of Solids To find the Contents of Solids To find the points of Inflection To find the radius of curvature of, Curves Of Involute and Evolute Curves Practical Exercises concerning Forces On the Motion of Bodies in Fluids On the Motion of Machines, and their Maximum effects Pressure of Earth and Fluids against walls and Fortifications— Theory and Practice of Gunnery Promiscuous Problems and Exercises in Mechanics, Statics, Dynam- A ART. 1. THERE are two methods which are adopted by mathemati 1 2 three ANALYTICAL PLANE TRIGONOMETRY. three data and the three unknown quantities, three equations, and obtaining, in expressions of known terms, the value of each of the unknown quantities, the others being exterminated by the usual processes. Each of these general methods has its peculiar advantages. The geometrical method carries conviction at every step; and by keeping the objects of enquiry constantly before the eye of the student, serves admirably to guard him against the admission of error: the algebraical me❤ thod, on the contrary, requiring little aid from first principles, but merely at the commencement of its career, is more properly mechanical than mental, and requires frequent checks to prevent any deviation from truth. The geometrical method is direct, and rapid in producing the requisite conclusions at the outset of trigonometrical science; but slow and circuitous in arriving at those results which the modern state of the science requires while the algebraical method, though sometimes circuitous in the developement of the mere elementary theorems, is very rapid and fertile in producing those curious and interesting formulæ, which are wanted in the higher branches of pure analysis, and in mixed mathematics, especially in Physical Astronomy. This mode of developing the theory of Trigonometry is, consequently, well suited for the use of the more advanced student; and is therefore introduced here with as much brevity as is consistent with its nature and utility. a 2. To save the trouble of turning very frequently to the 1st volume, a few of the principal definitions, there given, are here repeated, as follows: The SINE of an arc is the perpendicular let fall from one of its extremities upon the diameter of the circle which passes through the other extremity. The COSINE of an arc, is the sine of the complement of that arc, and is equal to the part of the radius comprised between the centre of the circle and the foot of the sine. The TANGENT of an arc, is a line which touches the circle in one extremity of that arc, and is continued from thence till it meets a line drawn from or through the centre and through the other extremity of the arc. The SECANT of an arc, is the radius drawn through o one of the extremities of that arc and prolonged till it meets the tangent drawn from the other extremity. The VERSED SINE of an arc, is that part of the diameter of the circle which lies between the beginning of the arc and the foot of the sine. The COTANGENt, cosecant, and COVERSED SINE of an arc, are the tangent, secant, and versed sine, of the complement of such arc. 3. Since ANALYTICAL PLANE TRIGONOMETRY. 3. Since arcs are proper and adequate measures of plane angles, (the ratio of any two plane angles being constantly equal to the ratio of the two arcs of any circle whose centre is the angular point, and which are intercepted by the lines whose inclinations form the angle), it is usual, and it is perfectly safe, to apply the above names without circumlocution as though they referred to the angles themselves; thus, when we speak of the sine, tangent, or secant, of an angle, we mean the sine, tangent, or secant, of the arc which measures that angle; the radius of the circle employed being known. 4. It has been shown in the 1st vol. (pa. 382), that the tangent is a fourth proportional to the cosine, sine, and radius; the secant, a third proportional to the cosine and radius; the cotangent, a fourth proportional to the sine, cosine, and radius; and the cosecant a third proportional to the sine and radius. Hence, making use of the obvious abbreviations, and converting the analogies into equations, we have rad. X sine COS. rad Xcos. rad. cot. = > sine COS. Or, assuming unity for the rad. of the circle, these tan. rad2 sine will become tan. A. sec. COS. a = b. cos. c + c . cos. B. COS. A. .. C a cos. B+ b. cos, a. .0 These preliminaries being borne in mind, the student may pursue his investigations. 5. Let ABC be any plane triangle, of which the side BC opposite the angle A is denoted by the small letter a, the side AC opposite the angle в by the small letter b, and the side AB opposite the A C B angle c by the small letter c, and cp perpendicular to AB; then is, ca. cos. B+b. cos. a. D sec. A For, since Ac=b, AD is the cosine of a to that radius; consequently, supposing radius to be unity, we have AD=b, cos. In like manner it is BD a. cos. B. Therefore, AD+BD —AB=c=α . cOS. B+b. cos. A. By pursuing similar reasoning with respect to the other two sides of the triangle exactly analogous results will be obtained. Placed together, they will be as below: cos. cosec. 1 COS. (1.) 6. Now, ANALYTICAL PLANE TRIGONOMETRY. 6. Now, if from these equations it were required to find expressions for the angles of a plane triangle, when the sides are given; we have only to multiply the first of these equations by a, the second by b, the third by c, and to subtract each of the equations thus obtained from the sum of the other two. For thus we shall have b2 + c — a2 = 2bc . cos. a, whence cos. a a2 + c2 — b2=2ac. cos. B, a + b2 — c2=2ab . cos. c, . cos. C, 7. More convenient expressions than these will be deduced hereafter: but even these will often be found very convenient, when the sides of triangles are expressed in integers, and tables of sines and tangents, as well as a table of squarës, (like that in our first vol.) are at hand. Suppose, for example, the sides of the triangle are a 320, b = 562, c = 800, being the numbers given in prop. 4, pa. 161, of the Introduction to the Mathematical Tables: then we have b2 + c2 — a2 2bc 853444 899200 Cos. B, b2 +c2 a2 a2 + c2 = b2 1 2αc 2ab log. 5.9311751 log. 5.9538080 The remainder being log. cos. A, or of 18°20′ 9.9773671 log. 2αc =512000 log. 5.7092700 The remainder being log. cos. B, or of 33°35′ 9.9207060 Then 180°-(18° 20′+33° 35′)=128o 5′ = c; where all the three triangles are determined in 7 lines. (II.) 8. If it were wished to get expressions for the sines, instead of the cosines, of the angles; it would merely be necessary to introduce into the preceding equations (marked II), instead of cos. A, COS. B, &c. their equivalents cos. a= ✓ (1-sin3. A), cos. B/(1-sin2. B), &c. For then, after a little reduction, there would result, 2a2 • CONTA 1 sin. A = 2be2a2 b2+2a2 c2+2b2 c2 (a+b1+c3) C= Or, resolving the expression under the radical into its four constituent factors, substituting s for a+b+c, and reducing, the equations will become |