« PreviousContinue »
Let EK be the ground line; p' the centre of the base r'n'G' on the horizontal plane; p" the vertical projection of the vertex of the cone, q' any given point in the circumference of the base, and R'q', PL the horizontal and vertical projections of the slant side passing through q'; also, let EG', EF" be the horizontal and vertical traces of the given plane.
Since the slant side is given by its horizontal and vertical projections r'a', PL, and the plane by its traces, we have only to find the projections of the required point by prob. 17, chap. 2. The operation is as follows: Produce 'R' to Gʻ and H ; draw G'v and HF" at right angles to EH ; Join VF' cutting PL in s", and draw s′′s' at right angles to EH cutting EH and P'q' in N and s', and Ns', NS" will be the horizontal and vertical projections of the point required.
In a similar manner we find the horizontal and vertical projections. D' and D",of the point in which the given plane is cut by the slant side which passes through R' the other extremity of the diameter Q'R'.
If the point E be at an infinite distance, the traces EG' and EF" become parallel to the ground line; and this circumstance produces a variation in the method of construction for some points that may require farther illustration.
Let AB be the ground line, xq'c' the base of the cone ou the horizontal plane, p' its centre, KP" the vertical projection of the axis of the cone; and EF', G"n" the traces of the given plane, which are parallel to AB.
Suppose the horizontal projection 'n' of two opposite slant sides to be the diameter of the base parallel to AB; and therefore P"L, P'm the vertical projections of those sides. To determine the points in which the plane meets those slant sides we may proceed as follows:
Make KD equal to Ko, join c'D cutting 'R' in z'; make KY“ equal to p'z', and through x" draw s'r' parallel to AB; then s's' and T′′T' being drawn perpendicular to AB, will give the horizontal projections of the required points; and s", T" the corresponding vertical projections.
Again, to determine the intersection of the plane and slant side passing through K: make P'v' equal to KP" which is the altitude of the cone; draw KV' intersecting co in w'; make w'x' parallel to AB, and x' will be the horizontal projection of the required point, and x'w will be equal to the vertical ordinate, the horizontal ordinate being кX.
To construct the horizontal projection of the curve made by the
Let AB be the ground line; KQ'c' the circumference of the
Suppose the given intersecting plane' to be parallel to the ground line, or which is the same in effect, let the horizontal and vertical traces A'v', T"B" of the given plane to be parallel to AB, and suppose the horizontal trace a'v' to touch the base of the cone in c'.
To find the axis of the projection, make ka equal to кк", and join c'a in P'R'o' parallel to AB; take P'o' equal to KP"; join ko' intersecting Ac' in u', and from u' draw u'D' parallel to AB, and c'D' will be the axis of the projection.
Again, to find the points in which the curve to be projected cuts the diameter 'n' parallel to AB; from Q' and R' draw Q'L, R'м perpendicular to AB, and P'L, P'M will be the projections of the slant sides passing through Q' and R': let c'a meet r'o'in R', and having made KY" equal P'R', draw н"Y"J" parallel to AB, and ", H'H' parallel to P'P' and 'H' will be the points required in q'R'.
To find the point in which the curve meets any other radi-
In a similar manner we may find any number of points in the required section C'E'D'F'.
When the points v, and T become to remote too be consequently used in the construction, we may find the required points of the curve by the method used in determining the intersection of the plane by the slant side passing through K.
In this example, in which the cone is divided by the plane into upper and under parts of the conic section, is called an VOL. II.
ellipse; the curve C'E'D'F' is therefore the projection of an
To construct the cllipse of which the curve C'E'D'F' in the preced-
This problem is readily solved by finding by prob.12
Or, we may proceed as follows, which is nearly equivalent. Because кo' is the position on the horizontal plane of the slant side passing through H, and KC'A the angle of elevation of the given plane; it is plain, that cu' is the transverse axis
of the ellipse section required. Make c'd equal to co', and
In like manner, take c' equal to CR', and make the perpendicular a equal to P'P', and will be a point in the required section. In a similar manner, we may find any number of points in the circumference of the required ellipse Ec'4.
It is evident, from this construction, that the ellipse SEC' is derived from c'e'D'F' be elongating each abscissa from cas CP' in the constant ratio of c'n' to c'v'; so that cr' is to c' as c'D' to c'è, while the semiordinate remains the same as P'H'.
And as the curve dec' is by the definitions of conic sections an ellipse, it is manifest from the constant ratio of the abscissas CP, and c' having a common semiordinate r'í' or an, that the projection c'e' D'F' is also an ellipse.
To construct the section of a cone by a plane parallel to the axis
Let AB be the ground line; r'the centre of the circular base KQ'R' of the cone touching the ground line AB in K: produce the radius p'K to P", and take KP" equal to the axis of the cone which is supposed to be at right angles to the plane of its base, and consequently to the horizontal plane; then P" is the ver tical projection of the axis, and p" of the vertex.
Suppose the cutting plane to be parallel to the vertical plane, and to intersect the horizontal plane in the straight line R'YQ', which is therefore parallel to AB, and consequently perpendicular to the diameter ck.
Draw any radius P's'T of the base, meeting R'q' in s”, and the circumference of the base in T. Find by prob. 1, chap. Iv, the vertical projection "v of the slant side passing through T, the corresponding horizontal projection of this slant side being PT through s' draw s's" at right angles to AB, and meeting ve" in s", and Ns" is the altitude of the conic surface at s', because Ns', NS" are evidently co-ordinates of a point of the slant side passing through T.
And, since the cutting plane which passes through n'e' is perpendicular to the horizontal plane, it is evident that Ns', NS" are the co-ordinates of the point in which the slant side