 | William Laxton - 1842 - 496 pages
...end is strengthened by five parallel cast iron girders, whose extremities are held by wrought iron straps rivetted on to the circumference of the tanks....There was originally only one brass force pump, 2 in. diameter, and 6 in. stroke ; this being found insufficient, another was added of 4 in. diameter,... | |
 | 1842 - 548 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of closejointed fir battens, fastened with copper rivets. This precaution...inches stroke. This being found insufficient, another wag added of 4 inches diameter, and henceforward a pressure of I in.' Hi-, per square inch was easily... | |
 | 1842 - 886 pages
...of these girders, several were broken. by the pressure applied during. the process. The vesselsare lined with felt, upon which is laid a covering of...sublimate. There was originally only one brass force pump, two inches diameter, and six inches stroke. This being found insufficient, another was added of four... | |
 | Perry Fairfax Nursey - 1842 - 538 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of closejointed fir battens, fastened with copper rivets. This precaution...force pump, 2 inches diameter, and 6 inches stroke. This_being found insufficient, another was added of 4 inches diameter, and henceforward a pressure... | |
 | 1842 - 538 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of closejointed fir battens, fastened with copper rivets. This precaution...corrosive sublimate. There was originally only one hrass force pump, 2 inches diameter, and 6 inches stroke. This being found insufficient, another was... | |
 | 1842 - 934 pages
...rivets. This precaution is necessary to prevent the mutual deterioration which \vould arise fromthe contact of the iron and corrosive sublimate. There was originally only one brass force pump, two inches diameter, and six inches stroke. This being found insufficient, another was added of four... | |
 | Charles W. Vincent, James Mason - 1843 - 320 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of close-jointed fir battens, fastened with copper rivets. This precaution...4 inches diameter, and henceforward a pressure of I 0Olbs. per square inch was easily obtained. The air-pump is 10 inches diameter, and 15 inches stroke.... | |
 | Charles W. Vincent, James Mason - 1843 - 468 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of close-jointed fir battens, fastened with copper rivets. This precaution...corrosive sublimate. There was originally only one brass force-pump, 2 inches diameter, and 6 inches stroke. This being found insufficient, another was added... | |
 | George Drysdale Dempsey - 1846 - 282 pages
...during the process. The vessels are lined with felt, upon which is laid a covering of close-jointed fir battens, fastened with copper rivets : this precaution...corrosive sublimate. There was originally only one brass force-pump, 2 inches 9 ' Civil Engineer and Architect's Journal,' vol. vi. p. 205. 10 Ibid. ยป Vol.... | |
 | Franklin Institute (Philadelphia, Pa.) - 1842 - 448 pages
...strengthened by five parallel cast iron girders, whose extremities are held by wrought iron straps, riveted on to the circumference of the tanks. Notwithstanding...sublimate. There was originally only one brass force pump, two inches diameter, and six inches stroke. This being found insufficient, another was added of four... | |
| |
... on to the circumference of the tanks. Notwithstanding the great strength of these girders, several were broken by the pressure applied during the process. The vessels are lined with felt, upon which is laid a covering of... 